Some BIOS Update Program allows Flash process done in Windows but the failure rate is quite high. BIOS updates that fail will result in your computer in this motherboard be damaged goods, unless a motherboard that has failitas Dual BIOS or Backup BIOS.
Then what is the solution? Create a bootable CD (read = can be used to boot) with a flash update program therein. You can also create a bootable USB stick with the flash update program therein. You can find writing about it in other parts.
Here I will use CD-burning programs Ahead Nero Burning ROM version 7. You can use CD burning software that you enjoy during the program has the facility of making a bootable CD.
First, Download Boot Image files here. The files are different versions of those used in the post Making Hiren's Boot CD from flashYou need to file this boot.zip to create a Bootable CD system. Use Winzip, WinRARextract other files or programs. Remember where you saved the file is extracted. You will need it later.
Here is a list of files contained in the image file. These files will appear in drive A: \ after you boot.
This image file contains only the important files needed DOS and seumlah ATAPI and SCSI CDROM drivers. If you are looking emm386 or himem, you will not find it.
Let's get started. I assume you've managed to download the necessary files and programs were appropriate BIOS update.
Create a Bootable CD Guide
1.Buka Nero Burning ROM and select "New Compilation".2.Select the CD at the top of the drop down list.3.Pada the left side, scroll down until a "CD-ROM (Boot)", Select.4.Pada Boot tab, select "Image File" as the source and Browse the location where you'd save a file boot.img5.Klik "New" button.6.Dalam session File Browser, navigate to the folder where you saved the downloaded BIOS file. Drag and Drop file to the left side panel7.Pilih CD-Writer you will be using from the drop-down list8.Klik the Burn button to start burning your bootable CD. Updating the BIOS using a bootable CD
Following guidance refers to the bios update DELL computer. Customize your order with the existing on your computer. There will be several different treatment for each motherboard.
1.Boot computer and when it appears the BIOS boot screen, press the F12 key. Insert the CD that you
created earlier.2.Select Booting from the CD, then you will see a DOS prompt A: \3.Drive A contains the files that are in boot.img as I mentioned earlier4.Drive Z contains Files Update your BIOS.5.Pindah to drive Z, type Z: [Enter]6.Pada DOS Prompt, type the name of your BIOS update file, for example I use BGX24005.EXE.7.Ikuti the on-screen instructions to complete.8.Restart your computer and you'll get your BIOS is updated!