The following practical steps and quick to set Radio Senao:
* Practical Step radio sets 200mW Senao SL2611 Senao
1.IP own default is 192.168.1.1/24 2.cable, adapter from Senao, cable radio congenital Stright Senao plug directly into an Ethernet
Card / LAN Card from your PC / Notebook you 3.for configure using the web-based, set your computer ip with ip 192.168.1.x (x = 2 to 254) 4.than ping to ip 192.168.1.1 (default ip denao) if you are using windows can type ping 192.168.1.1-t at the
start-run or command prompt, if you use linux, you can type on the console with the command ping
192.168.1.1
if there is a replay like this:
: ~ # Ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56 (84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq = 1 ttl = 64 time = 0021 ms 64 bytes from 192.168.1.1: icmp_seq = 2 ttl = 64 time = 0022 ms means that you connect with a radio
5.type 192.168.1.1 in your favorite browser such as opera, firefox, internet explorer, konqueror etc. 6.and than will appear user and logged in, you can fill out login = admin without the password, and directly
enter 7.if successful you will mandapatkan display with blue background please you set as needed 8.go specify the ESSID, channel, WEP (for security) 9.if there are mistakes you can reset back to initial settings by pressing the reset button in a state radio on,
you can press
approximately 2 to 3 minutes 10.selamat try
* Practical Step radio sets 200mW Senao SL2611 Senao
1.IP own default is 192.168.1.1/24 2.cable, adapter from Senao, cable radio congenital Stright Senao plug directly into an Ethernet
Card / LAN Card from your PC / Notebook you 3.for configure using the web-based, set your computer ip with ip 192.168.1.x (x = 2 to 254) 4.than ping to ip 192.168.1.1 (default ip denao) if you are using windows can type ping 192.168.1.1-t at the
start-run or command prompt, if you use linux, you can type on the console with the command ping
192.168.1.1
if there is a replay like this:
: ~ # Ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56 (84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq = 1 ttl = 64 time = 0021 ms 64 bytes from 192.168.1.1: icmp_seq = 2 ttl = 64 time = 0022 ms means that you connect with a radio
5.type 192.168.1.1 in your favorite browser such as opera, firefox, internet explorer, konqueror etc. 6.and than will appear user and logged in, you can fill out login = admin without the password, and directly
enter 7.if successful you will mandapatkan display with blue background please you set as needed 8.go specify the ESSID, channel, WEP (for security) 9.if there are mistakes you can reset back to initial settings by pressing the reset button in a state radio on,
you can press
approximately 2 to 3 minutes 10.selamat try