There are several reasons to replace RB450G Mikrotik router. These reasons include ethernet switches every day as a downlink RB450G ask is restarted, remove the node (node) Ethernet switch so that the router can direct to other routers, improve performance RB450G router because this is the main router (NOC).
To change the router RB450G to RB1100, at least all the configurations on RB450G must be copied to the router RB1100. Configuration that must be considered are:
1.Nama should be made exactly the same interface 2.Alamat IP, enter the IP menu -> Address 3.DNS. Go to the menu IP -> DNS 4.Firewall, especially filters, NAT, Mangle, Service Ports, Address List. Use the menu IP -> Firewall.
Mangle will be used when configuring the Queue Tree. 5.Routing and his rule-rule in order to separate the local and international traffic. Go to the menu IP -> route -> routes and rules.
6.Service-service. IP settings via the menu -> services 7.Queue Types, use the Queue -> Queue Types -> pcq pcq-and downstream-upstream 8.Queue Tree, use the Queue -> Queue Tree 9.System -> Identity 10.System -> ntp client 11.System -> schedule
To equate the two routers, both routers with WinBox open in different windows. This will facilitate comparison.
To copy the configuration it was very busy route. If not copied, then the package can not be directed to a local site or international site. To reduce the inconvenience, I copy the contents of the site and then modify slightly http://ixp.mikrotik.co.id/download/nice.rsc then enter into a new router. Examples of modification are:
Original: / Ip firewall address-list add list = nice address = "1.2.3.4" remove [find list = "nice"] add list = nice address = "182.0.0.0/12" add list = nice address = "114.120.0.0/13" add list = nice address = "120.168.0.0/13" ff
Results modification: / Ip route add dst-address = "182.0.0.0/12" gateway = ether2-IIX add dst-address = "114.120.0.0/13" gateway = ether2-IIX add dst-address = "120.168.0.0/13" gateway = ether2-IIX ff
To change the router RB450G to RB1100, at least all the configurations on RB450G must be copied to the router RB1100. Configuration that must be considered are:
1.Nama should be made exactly the same interface 2.Alamat IP, enter the IP menu -> Address 3.DNS. Go to the menu IP -> DNS 4.Firewall, especially filters, NAT, Mangle, Service Ports, Address List. Use the menu IP -> Firewall.
Mangle will be used when configuring the Queue Tree. 5.Routing and his rule-rule in order to separate the local and international traffic. Go to the menu IP -> route -> routes and rules.
6.Service-service. IP settings via the menu -> services 7.Queue Types, use the Queue -> Queue Types -> pcq pcq-and downstream-upstream 8.Queue Tree, use the Queue -> Queue Tree 9.System -> Identity 10.System -> ntp client 11.System -> schedule
To equate the two routers, both routers with WinBox open in different windows. This will facilitate comparison.
To copy the configuration it was very busy route. If not copied, then the package can not be directed to a local site or international site. To reduce the inconvenience, I copy the contents of the site and then modify slightly http://ixp.mikrotik.co.id/download/nice.rsc then enter into a new router. Examples of modification are:
Original: / Ip firewall address-list add list = nice address = "1.2.3.4" remove [find list = "nice"] add list = nice address = "182.0.0.0/12" add list = nice address = "114.120.0.0/13" add list = nice address = "120.168.0.0/13" ff
Results modification: / Ip route add dst-address = "182.0.0.0/12" gateway = ether2-IIX add dst-address = "114.120.0.0/13" gateway = ether2-IIX add dst-address = "120.168.0.0/13" gateway = ether2-IIX ff