how to connect 2 Routers RB450G
RB450-1
Public Ip 110.137.30.246 (PPPoE Dial-in router)
Router Ip 192.168.2.254
A user ip 192.168.2.xxx (sekiar 5 users)
RB450-2
Public IP 110.137.55.23 (PPPoE Dial-In Router)
Router Ip 192.168.1.254
User Ip b 192.168.1.xxx (sekiar 5 users)
how to make a user can connect with user b (where a user a and user b has to access to the Internet) and not a system of networks connected vpn
answer :
use eoip
tunnel should be the same n-addressnya remote is a remote destination IP address
to rb4501 (public ip = 110.137.30.246)
/ interface eoip add arp = enabled disabled = no l2mtu = 65535 name = eoip-tunnel1 remote-address = 110.137.55.23 tunnel-id = 12
RB450-2 (public ip = 110.137.55.23)
/ interface eoip add arp = enabled disabled = no l2mtu = 65535 name = eoip-tunnel1 remote-address = 110.137.30.246 tunnel-id = 12
continue to ip address for rb450-1 n 2, with its interface eoip-tunnel1 them.
n must be a segment between the two, so stay on the ping test
RB450-1
Public Ip 110.137.30.246 (PPPoE Dial-in router)
Router Ip 192.168.2.254
A user ip 192.168.2.xxx (sekiar 5 users)
RB450-2
Public IP 110.137.55.23 (PPPoE Dial-In Router)
Router Ip 192.168.1.254
User Ip b 192.168.1.xxx (sekiar 5 users)
how to make a user can connect with user b (where a user a and user b has to access to the Internet) and not a system of networks connected vpn
answer :
use eoip
tunnel should be the same n-addressnya remote is a remote destination IP address
to rb4501 (public ip = 110.137.30.246)
/ interface eoip add arp = enabled disabled = no l2mtu = 65535 name = eoip-tunnel1 remote-address = 110.137.55.23 tunnel-id = 12
RB450-2 (public ip = 110.137.55.23)
/ interface eoip add arp = enabled disabled = no l2mtu = 65535 name = eoip-tunnel1 remote-address = 110.137.30.246 tunnel-id = 12
continue to ip address for rb450-1 n 2, with its interface eoip-tunnel1 them.
n must be a segment between the two, so stay on the ping test