If you forgot your username and password of course you RB750 easily reset it by pressing the reset button, and aka back to the default ip, 192.168.88.1. Well .. This resets the author's experience RB450G friend's who have not found a way for the setting resetnya others. Perhaps you also see the same thing, then you will be able to reset it back. Oh yes this tutorial is the same for different location RB433 only reset it. OK the following way ... ..
1. Open Casing RB450G
2. Off/ Unplug your RB450G adapter,
1. Open Casing RB450G
2. Off/ Unplug your RB450G adapter,
cable so that both parts connect
3. Short the two horseshoes in RB450G (see picture RESET position) can use the minus screwdriver, or a 4. Turn RB450G (while in shortkan, DO NOT released YOOO) 5. Listen carefully, the sound of "beep" booting to-1, "beep beep beep" boot to a new short-2 may be off his
6. Furthermore, if all procedures performed with TRUE, then you RB450G already been reset, if NOT mean
there is something wrong, try again!
7. The final step to test the reset, plug the LAN cable from Laptop / PC to a LAN port (ether2), IP DHCP.
7. The final step to test the reset, plug the LAN cable from Laptop / PC to a LAN port (ether2), IP DHCP.
If you get a LAN IP from RB450G then, congratulations, you managed to reset it ... and not mumet alias
bother anymore with the problems RB450G.
OK it to RB450G, then do the same way for RB433AH, note the location of the RESET (horse shoe ... wild horses). Here's the picture:
OK it to RB450G, then do the same way for RB433AH, note the location of the RESET (horse shoe ... wild horses). Here's the picture: